SKU/Artículo: AMZ-B0CY2946D2

PGFUN

Z Axis Automatic Tool Setter Modifying Kit for PGFUN CNC 3D Touch Probe Edge Finder Contactor (M3.0 Thread)

Detalles del producto

Disponibilidad:
En stock

Peso con empaque:
2.08 kg

Devolución:
No

Condición
Nuevo

Producto de:
Amazon

Viaja desde
USA

Sobre este producto

PGFUN The Latest Upgraded Anti-roll 3D Touch Probe Waterproof Edge Finder Specification: Power: DC5-24V 3 NPN-NO Wiring: Red-VCC (DC5-24V power), Yellow: IO/ Signal Output, Black- GND(DCM) Repeatability Accuracy: 0.01 mm/ 0.0004 in. Feedrate: 50-200 mm/min. Approach Direction: ±X, ±Y, +Z. Over Travel Protection Distance: X- ± 4mm/0.16 in, Y- ±4mm/ 0.16 in, Z- 2mm/ 0.08 in. Lifetime: > 3 million triggers. Trigger Force: XY- 0.5-0.82 N, Y- 2.7N. Application: theoretically it can work with MACH3, Mach4, Dynamotion, LiNUXCNC, UCCNC, Centroid CNC, or any other CNC control software Package Include: CNC touh probe x 1, cable x 1, allen wrench x 1, probe tip x 1, wire connector pack x 1 (to solve the lack of control board wiring ports and extend wire). Software Recommendation Probe Wizard or ProbeIt are recommended for Mach3, and GRBLGRU is recommended for GRBL. FAQs: Q1: Need to turn on the spindle speed? A1: Please do not, or it may cause measurement error. Q2: Why is the concentricity different when the probe is installed? A2: Because the low-accuracy spring collet can't guarantee 100% positive position. After each installation of the probe, even if the concentricity is adjusted to 10 μm, there will still be deviations when the probe is re-installed. So it is best to use a AAA /UP or higher accuracy ER spring collect (run-out tolerance <0.0002") for your chuck. It is recommended to use a high-precision gauge to check the concentricity after installing the chuck. Q3: i need a NC touch probe, what should i do? A3: we added the NPN-NC touch probe, you can buy the right wiring version for the machine now. Q4: Does this touch probe work for the non-conductive material like acrylic? A4: This is a mechanical probe, it identifies and transmits the signal by physical contact, do not worry about the conductivity of the material.

Producto prohibido

Este producto no está disponible

Este producto viaja de USA

a tus manos en

Medios de pago

Conoce más detalles

This is a Z-axis automatic CNC tool setter modifying kit for PGFUN 3D Touch Probe, which is designed for an extra function of the touch probe, so it's recommended for desktop-level/ entry-level CNC machines. There is a magnetic disc under the base for easy fixing, not recommended for industrial-level CNC machines or machine centers. Main Specification: tool height: 30mm/ 1.2inch, accuracy: 0.005 mm/ 0.0002 inch, base plate dia: 31mm/ 1.22 inch, top plate dia: 10mm/ 0.4 inch, thread: M3.0 Package Include: base plate x 1, M2.5 top plate x 1. (if any more plate replacement are needed, free to contact us) Note: This Only Fits for PGFUN New Updated Ruby Ball Touch Probe with 8mm Shank, We Are Not Responsilble for the Fitting Issue for Other Similar Touch Probe and Can Not Work with Touch Probe with 6mm Shank.

Z Axis Automatic Tool Setter Modifying Kit for PGFUN CNC 3D Touch Probe Edge Finder Contactor (M3.0 Thread)

Conoce más detalles